Multi Layered Disposable Dust Mask , Cupped Face Mask Nose Bridge Design

Multi Layered Disposable Dust Mask , Cupped Face Mask Nose Bridge Design

Description:

1. Personal protective equipment designed to prevent or reduce dust in the air from entering the human respiratory organs to protect life;
2. Material: Anti-particulate mask is mainly made of two layers of non-woven fabric, with filter cloth (melt-blown cloth) in the middle.
3. Filtering principle: Filtering dust mainly depends on the middle filter cloth. Since the meltblown cloth has electrostatic characteristics, it can absorb the positive electrode particles. Since fine dust is adsorbed on the original filter, and the original filter is static and cannot be cleaned, the self-priming filter type anti-particulate respirator needs to be replaced regularly..

Features:

1. Multi-layered Protection.

Our products use multi-layer protection principles to further protect your health and safety.

2. Nose Bridge Design.

The design of the nose bridge inside the sponge can be adjusted to fit the face.

3. Hanging Ear Rope.

This product is designed with high elastic cotton hanging ear rope, which can be easily pulled without tension.

4. Using high-quality raw materials, 180-degree perfect fit, can effectively inhibit bacterial attack.

How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.