High Precision Portable Infrared Thermometer Medical Use For Hospital

High Precision Portable Infrared Thermometer Medical Use For Hospital

Human body infrared thermometer

Infrared thermometer consists of optical system, photodetector, signal amplifier, signal processing, display output and other parts. The optical system gathers the target infrared radiation energy in its field of view, and the size of the field of view is determined by the optical parts of the thermometer and its position. The infrared energy is focused on the photodetector and converted into a corresponding electrical signal. The signal passes through the amplifier and the signal processing circuit, and is converted into the temperature value of the measured target after being corrected according to the internal therapy algorithm and target emissivity of the instrument.

Advantage

1. Non-contact, no need to touch each other when measuring human temperature, avoiding the danger of infection and ensuring safety
2, rapid temperature measurement, accurate readings, suitable for rapid investigation of a large number of people
3. It is not necessary to enter the ear canal when measuring body temperature, and it is not necessary to replace earmuffs, which is clean and hygienic.
4, laser positioning, accurate measurement of the temperature of the target site, can measure the body temperature of the forehead, underarms, body surface, etc.
5. The temperature limit can be set, and an audible alarm will be issued when the limit temperature is exceeded, and the abnormal temperature in the crowd can be accurately checked.
6, infrared temperature measurement, no harm to human body

Daily care

Dirt on the outside: Wipe the dirt with a clean, soft cloth and water, or wipe with a cotton swab and medical alcohol. Wiping with medical alcohol can also have the effect of disinfection. Be careful not to add too much water or alcohol to prevent damage to the product if it flows into the interior.
Internal dirt: The internal infrared detector is an important device. Do not touch or press with your fingers or other objects, otherwise it will affect the accuracy of the measured value. When the infrared detector is found to be dirty, wipe it with a cotton swab moistened with 95% absolute alcohol.